When the error code F 06 appears on the display of the Indesit electronic washing machine, you can try to figure out the problem yourself. This error means that there are problems in the management, and the machine does not respond to commands.
The electromechanical model СМА Indesit gives an error F6 by flashing the “Extra rinse” and “Soak” indicators. Also, the “Quick wash” - “Super wash”, “Ironing” - “Dirty laundry” lights may be on. The user may notice that the “Lock” indicator is flashing.
What to do and how to restore the machine?
Decoding error F06
DTC F 06 on the display indicates a malfunction of the command unit. This means there is no reaction to pressing the buttons, the machine does not work, does not start the washing process.
What to do to troubleshoot
You can solve the problem and eliminate the F6 error in several consecutive steps. Immediately you need to determine what happened to the Indesit washing machine.
The machine does not respond when turned on
- Check the availability of electricity in the room, the serviceability of traffic jams.
- Check the power outlet and cable with a multimeter. If external damage is evident, replace the wire.
- If the machine is connected via an extension cord, inspect it for defects.
- Check the functionality of the buttons and the control module. If any violations are visible, then you can not do without the help of a professional master. You may need to replace the Start button or triac.
Video about replacing the control module will help to understand the intricacies:
Erratic flashing indicators
To remove the error F06, unplug the washer from the network, reboot for 15-20 minutes. If after switching on there was no error reset, and the code is displayed again, then check the wiring. In some Indesit models, the wires come into contact with internal parts, which leads to their malfunction.
What to do in this case, how to fix everything? Check the cable with your own tester for damage. Replace if necessary.
Check the capacitors as shown in the video, maybe the problem lies in them:
The washing machine turns on but does not start the wash
How to fix the problem and return the machine to working?
- Check the boot hatch. If it is not tightly closed, the protective mechanisms will not allow water to start.
- Make sure that the door is energized.
- Is current flowing normally but the hatch is not blocking? The locking device must be replaced.
- Observe how water enters the tank. Are there any extraneous sounds, or is there complete silence? So, water comes with difficulty, and there is nothing to do the washing.
When the Indesit washing machine shows error F06 on the display, the main thing is to pay attention to the repair. As practice shows, troubleshooting can be done independently.